Specifications and Design Values
 

Abrasion Resistance 97.4% Greater than Concrete ASTM C-944
Applied Thickness 2 Inches Minimum
Coefficient of Thermal Expansion 11-12x10(-6th power) Units Per Degree F.
Compressive Strength To 15,000 p.s.i. ASTM C 579-75
Curing Time 15 to 60 minutes
Density 150 lbs./cu. ft.
Electrical Conductivity 3.31 x 10(-8 power) ohm/cm(-1 power) ACI Monograph No. 6, ASTM D-257
Flexural Strength To 3,000 p.s.i. ASTM C 580-74
Freeze Thaw Strength After 300 Cycles - No Loss, No Cracks ASTM C-666
Heat Resistance 400 Degrees F. / 24 hrs. 100% Strength Retained
Modulus of Elasticity 4.0x10(6th power) p.s.i ASTM C-469
Operating Temeratures To 250 F in most Media
Porosity 0.1% to 0.30%

Priority Pollutants Extraction Acids, Bases, Metals and Synthetic Organic Pesticides

Below Detection Limits, ppm E.P. Tox and S.O.C.
Shrinkage Less Than .1%
Tensile Strength to 2,000 p.s.i. ASTM C 307-77

 

                                             HOME | PRODUCTS | ABOUT US | CONTACT US | FEEDBACK | WHAT'S NEW

 

louis vuitton uk beats studio victoria secret australia mont blanc meisterstuck maizitang cheap mont blanc pens abercrombie fitch shop beats headphones online tiffany necklaces mont blanc